BBQ Guru UltraQ Temperature Kit
£258.90 – £449.90The UltraQ gives you everything that a DynaQ will:
• Ramp Mode ensures perfect cooked food
• Intelligent Lid Detection
• A large LED display
Showing 1–16 of 30 results
The UltraQ gives you everything that a DynaQ will:
• Ramp Mode ensures perfect cooked food
• Intelligent Lid Detection
• A large LED display
The Dyna Q covers off all the features already available in the DigiQ
DX3:
• Pit temperature control via the pit probe
• Meat temperature monitoring and alarm via a single food probe
• Ramp Mode shuts off the fan to ensure that your food doesn’t overcook
• Intelligent Lid Detection holds the fan back from kicking in until the lid has been closed
With new custom settings and enhanced features, the new cutting-edge BBQ Guru DigiQ DX3 is your must-have automatic temperature control for consistently creating tender, juicy slow-cooked meat every time.
Backwoods Smoker Adapter Door
The Backwoods Smoker Adapter Door is designed to clamp tightly over the existing damper door. In a matter of seconds you are ready to fire up your smoker and cook all night long.
(Used on all models except the Patio Model)
Comes with high-temp silicone kill plug.
It’s the one size fits all inducer.
The Bulkhead Inducer can be mounted onto almost any cooker. The inducer will fit through insulated walls up to 2-1/8”: thick or as thin as 1/8” thick. To install simply use a step drill or hole saw and make a 1-3/8” hole below the fire box grate. Adjust the snap ring for the wall thickness and insert it through the hole. Tighten the inducer nut onto the inducer tube from inside the pit. Consult factory for custom wall thicknesses. The inducer tube and hardware are made of Stainless Steel. Comes with high-temp silicone kill plug.
This is a new adapter we created at BBQ Guru for the Broil King Keg 5000 that can be used with the Pit Viper fan and for the PartyQ, DigiQ and CyberQ
1-1/2 Ball Valve Adapter Screws into 1-1/2 Ball Valve
This adaptor consists of two parts. The 3/4” stainless threaded adaptor and a 1-1/2” to 3/4” bushing. Screw the bushing into the 1 1/2” ball valve (hand tight only) and screw the 3/4” threaded adaptor into the bushing. (hand tight only)
Comes with high-temp silicone kill plug.
***The Ball valve shown in the picture is NOT included.
Introducing our newest adapter for the Akorn Jr. This adapter can work with any BBQ Guru PartyQ, DigiQ and CyberQ Cloud temperature control device and the Pit Viper fan system.
This 3/4” threaded adaptor has been designed to screw into a 3/4” ball valve. If you have a smaller or larger ball valve, you can purchase a bushing to adapt to your size ball valve for your BBQ. Comes with high-temp silicone kill plug.